Description
Output Input
MIG Pulsed
CobraMAX
™
Push-Pull Gun
ACCESSORIES
Processes
Advantage Lincoln
Recommended Expendable Parts Options
Order
K2252-1 Air-Cooled, 15 ft. (4.5m)
K2252-2 Air-Cooled, 25 ft. (7.6m)
Drive Roll Kits, Drive and Idler Rolls, Contact Tips, Copper Gas
Cups, Gun Liners, Conduits
Recommended Wire Feeder Options
Cobramatic
®
Wire Feeder
Recommended Power Source Options
CV-250, CV-300, CV-400, CV-655, Power MIG® 300
(1)
,
V350-PRO, DC-400, DC-600, DC-655
• Superior push-pull wire feeding technology for smooth
feeding and minimized damage to the wire.
• Lightweight, ergonomic handle - weight distribution is equally
balanced front and back for better feel and control.
• Sturdy bottom-mounted trigger can be operated with either
hand.
• Fine adjustment of wire feed speed is easily accomplished
using the multi-turn adjustment dial.
• Flip-up drive roll cover for easy access to wire. Quick wire
release for easy wire adjustments.
• Complete with a knurled drive roll and a grooved idler roll,
which will handle both steel and aluminum wire
from .030-1/16" (0.8-1.6mm) diameter.
• Interchangeable contact tips, drive and idler rolls, and
conduits between Prince
®
XL, CobraMAX
TM
, and Python
®
guns – no need to stock multiple consumables.
42
VAC
When you’re ready to move up to a push-pull wire feeding system, consider the CobraMAX.
This easy-to-handle air-cooled gun shares many of the same features with our top-of-the-line
Python push-pull gun, including an ergonomic handle design, fingertip controls, and foolproof
set up. With a fixed gooseneck design and 150 amp 100% duty cycle rating, the CobraMAX is
an ideal push-pull gun.
Publication E12.12 12/03
www.lincolnelectric.com
(1)
Does not require Cobramatic. Requires Connection Kit (K2154-1).
Note: CobraMAX
TM
gun is a registered trademark of MK Products, Inc.
Wire Diameter
1/16" (1.6mm)
3/64" (1.1mm)
.035" (0.9mm)
.030" (0.8mm)
Air Cooled
50
75
100
200
250
275
300
325
350
375
400
425
225
125
150
175
Welding Current
(amps)
CobraMAX Push-Pull Gun Selector Guide
50%
100%
Duty Cycle Limitation
Allowable time within a 10 minute period
the maximum rated amperage can be maintained
Amps
NOTE:
Wire Diameter and
Current may vary depending
on your particular Power
Supply and Welding Voltage.
Wire Diameter and Current
based on 5356 Aluminum Wire.
