IM6015
REDI-MIG
®
210c, 250c, 250s, 325c, 325s
Page 11
1
5
4
2
3
2
3
1
2
3
1
7
8
4
5
6
11
11
11
5
4
Section 2 - OPERATING INSTRUCTIONS
7. VOLTAGE METER -
Analogue meter displays welding voltage.
Supplied as standard on REDI-MIG
®
325c. Available as a field fit
option for other REDI-MIG
®
models.
8. AMPERAGE METER -
meter displays welding amperage.
Supplied as standard on REDI-MIG
®
325c. Available as a field fit
option for other REDI-MIG
®
models.
9. GAS PURGE/WIRE INCH –
A two position toggle switch
located on the REDI-MIG
®
4s Use the gas purge momentary
toggle switch to operate the gas solenoid to purge air from the
gas supply after connecting a new gas cylinder. Gas purge will
only operate while the toggle switch is held upwards. Use the
same toggle switch to operate the wire feed motor and “cold”
inch the wire, by pushing the toggle switch downwards.
