Impinger II – Installation & Operation Manual
9
STACKING INSTRUCTIONS
FOR SINGLE OVEN
CAUTION:
DO NOT USE
STANDOFFS AS A
LIFTING MEANS
FOR DOUBLE OVEN (Step 1)
CAUTION: USE EXTREME CARE SO OVEN
DOES NOT SLIP OFF STAND BEFORE
SCREWS HAVE SECURED OVEN.
BOTTOM UNIT
1. Remove 4 screws holding top in place and
save (2 in front, 2 in rear).
FOR DOUBLE OVEN (Step 2)
FOR DOUBLE OVEN (Step 3)
TOP UNIT
1. Remove door, conveyor and finger assemblies.
2. Turn unit on left side, as shown.
3. Drill holes in cover, as shown. Refer to step 3, pg. 14.
4. Assemble top of bottom unit to bottom of top unit with
4 bolts, as shown.
STACKING UNITS
1. Position top unit over top of bottom unit and align
top flanges with bottom unit.
2. Replace 4 screws, as shown (2 in front, 2 in rear).
3. Replace door, conveyor and finger assemblies.
4. Stacking is complete.
