background image

LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259 • Tx 466088

Subject to modifications

Owner Manual

Technical Description

Page 1 from 13

2.1A-28001-A94

Table of contents

Safety instructions ................................................................. 2

Electrical connections ......................................................... 3
Putting into operation .......................................................... 3
Maintenance and repair ..................................................... 3

Quicklub Grease Pump Model PP ........................................... 4
Technical Data ......................................................................... 4
Commissioning of the system ................................................ 5
Pump and main lines ............................................................... 5
Typical outlet combination ........................................................ 5

Contents

Page

PP with 1,5-litre reservoir (Front view) ........................................ 6
PP with 1,5-litre reservoir (Side view) ........................................ 7
PP with 0,4-litre reservoir (Side view) ........................................ 8
Filling instruction for model PP 4 ............................................... 9
Spare part list ........................................................................ 10
Troubleshooting .................................................................... 11
Declaration by the manufacture .............................................. 13

Contents

Page

Quicklub Grease Pump

Model PP

Summary of Contents for PP:














Reviews: