5.5.
ASSEMBLY / DISASSEMBLY
The assembly / disassembly operations of any machine part
are performed with the stopped machine and
with the plug disconnected from the socket,
or with the sectioning device in OFF.
TOOLS CHANGE
In the machine with tip-up head, the tool can be removed manually for its change and cleaning.
The tools change must happen as showed follow (cfr. annexed):
1.
pull the unblocking knob of the tip-up head;
2.
lift manually the tip-up head up to its possible highest position;
3.
take the tool inserted in the machine dinghy;
4.
lift manually the tool blocking ferrule and extract the tool;
5.
introduce the new tool in the dinghy so that the mechanical hook is inserted and that the ferrule returns in its initial rest
position;
6.
lower manually the tip-up head up to its possible lowest position so that the mechanical hook is inserted and the knob
returns in its initial rest position;
BOWL CHANGE
In the machine with tip-up head, the bowl can be removed manually for the dough unloading, for its change and cleaning. The
tools change must happen as showed here follow (cfr. annexed):
1.
pull the unblocking knob of the tip-up head;
2.
lift manually the tip-up head up to its possible highest position;
3.
take the bowl and rotate in anticlockwise up to its complete unhooking,
4.
extract manually the bowl (if of mass superior to 25kg use adequate lifting and hooking systems);
5.
after having changed or emptied completely the bowl, place it near the hooking system and rotate it in clockwise up to
its complete block;
6.
lower manually the tip-up head up to its possible lowest position so that the mechanical hook is inserted and the knob
returns in its initial rest position;
5.6.
DEVICES AND CONTROL FUNCTIONS
Here follow the main
control devices
are showed (cfr. annexed):
ELECTRIC MIXER ART. 2700
CONTROL
ACTION
POSITION
GENERAL
SWITCH
(I) FEEDING / (OR) SECTIONING
MACHINE SIDE
BUTTON
ON
/
OFF
(ON) DRIVES THE MACHINE
MOVEMENT
(OFF) STOPS THE MACHINE
MOVEMENT
CONTROLS PANEL
MODE BUTTON
CHANGE THE BUTTONS CHOICE
“+”
AND
“-“
OF
THE SELECTOR BETWEEN
:
“
SETTINGS FOR SPEED CHOICE
”;
“
TIME SETTINGS OF THE WORKING DURATION
”
CONTROLS PANEL
SELECTOR
[
BUTTONS
“+”
/
“-“]
WORKING DURATION SETTING
,
THROUGH THE
BUTTONS WITH SYMBOL
“+”
(
INCREASE
),
THE
BUTTON WITH SYMBOL
“-“
(
DECREASING
)
–
THE VISOR DISPLAYS THE SET VALUE
,
THE SET
SPEED
(1
÷
8)
IS PRECEDED FROM THE
SYMBOL
“P”
CONTROLS PANEL
BUTTON
START
/
STOP
ACTIVATE
(START)
/
DISACTIVATE
(STOP)
THE ROTATING PARTS MOVEMENT
CONTROLS PANEL
MUSHROOM BUTTON
STOPS THE MACHINE IN
EMERGENCY CONDITION.
MACHINE SUPERIOR
COVER
Service@linda-lewis.co.uk
0161 696 0052
www.linda-lewis.co.uk
