2.2.
RESPONSIBILITY
¾
If the present manual endures damages or is lost, it is possible to request a copy to the Authorized
Assistance Centre.
¾
The present manual reflects the technical state during the machine manufacturing; the manufacturer
reserves the right to update the production and of consequence other manual issues, without the
obligation to update productions or previous manuals, if not in particular cases regarding the people
health and safety.
¾
Pay particular attention to the residual risks content present on the machine and the prescriptions to
which the operators must keep.
¾
The manufacturer is the responsible for the machine in its original configuration.
¾
The manufacturer isn’t the responsible for damages caused from the improper use or not correct of the
machine and documentation or for damages caused from the imperative standards violation, negligence,
lack of experience, imprudence and the not respect of regulation standards on behalf of the employer, of
the operator or the maintenance man and for every possible damage caused from an irrational, improper
and/or wrong use
¾
The manufacturer isn’t the responsible for the consequences caused from the not original spare parts use
or of equal characteristics.
¾
The manufacturer is the responsible only for the information showed in the manual original version in
Italian language.
¾
The non-fulfillment prescriptions included in this manual will cause the guarantee immediate decay.
The factory responsibles, that supervision to the working activities, in the field of the foreseen respective
attributions and competences must:
¾
Carry out the foreseen safety measures;
¾
Make informed the operators about the specific risks whom are exposed and bring to their knowledge the
prevention essential standards;
¾
Prepare and require that the single operators observe the safety standards and use the protection means
put at their disposal:
¾
Get down working more operators, contemporary, on this product.
It explains besides that following the put in service of the machine, the same is subjected to what foreseen /
prescribed from the directive 89/655/CEE and the successive modifications
2.3.
SIMBOLOGY MEANING
Here follow it is clearly specified the symbols and definitions meaning, which will be used in the present document.
DANGER
It shows the danger presence for who works on the machine and for who is the vicinity, so the indicated
activity must be performed in accordance with the actual accident prevention standards and with the indications
showed in the present manual.
PRECAUTION
It shows a warning on useful information and/or further recommendations and/or shrewdness about the actual
operation.
ATTENTION
It shows an operation to perform with attention to avoid damage to the machine.
Service@linda-lewis.co.uk
0161 696 0052
www.linda-lewis.co.uk
