USING YOUR HIGHCHAIR AS A JUNIOR CHAIR
1. Remove the Tray and Arm Rests (G) and store along with this booklet in a safe place for future use.
2. Lift the Back Rest (F) and remove the Safety Harness from behind and below by turning the straps and
feeding them through the slots. (NOTE: Please keep them safe for future reference)
3. Turn the catches on the underside of the Seat (C) to release the Metal Seat Support.
4. Using the Plastic Nut Spanner (N) loosen all 4 Plastic Nuts (O) and swap the positions of the Seat (C)
and the Plastic Bolts (H) around (so the seat (C) is in the lower position).
5. Replace the Plastic Nuts (O) and tighten with the Plastic Nut Spanner (N).
6. Lower the Seat (C) and locate the Metal Seat Support in the Grooves marked (Y) and secure with the
metal catches.
7. Replace the Back Rest (F).
8. Ensure the Back Rest Inserts (I) have remained in place and replace and re-tighten the Allen Bolts (J)
and the Bolt Covers (K).
Y
11
Summary of Contents for 44465
Page 3: ...3 F G J K L M N O H I...
