24
EN
• You need a network router with the latest firmware. Ideally it
should support the WLAN standard 802.11a/b/g/n/ac and also
WPS. For high resolutions only so-called AC routers are suitable.
• Your internet connection should provide at least 25 Mbit/s.
• With WLAN operation the signal strength at the installation site
must be good or very good. For the transmission of high resolu-
tions the distance should be less than 10 m (33 ft.).
• You need a current smartphone or tablet. Please install the
LINDEMANN app on it. This can be found at the app store for
iOS or at Google Play for Android.
Note: Most functions and settings of the musicbook Source can
only be operated with the LINDEMANN app!
Operation on a LAN cable
Establish a connection between your router and the
musicbook. For this purpose use the included LAN ca-
ble. Connect the musicbook to a power outlet by using the includ-
ed power cable. Turn the musicbook on. The device will log in to
the network for the first time. Be a little patient now: this proce-
dure may take some time.
Open the LINDEMANN app on your smartphone/tablet. Under
“Devices“ select the musicbook as playback device and off you
go! Select the desired source and start browsing.
WLAN operation
In order to run the device within a WLAN network, it
must be logged in there. Mount the antennas. The eas-
iest way to connect is the “push-button connection“ via WPS. Set
the device as described above and turn it on. As soon as it has
connected to the app and the display reads “Network“, press the
WPS button on your router until the WLAN indicator there starts
flashing (may differ depending on router model). Now using an
entry pen, press the WPS button on your musicbook until the
WLAN
SET-UP
LAN
The LINDEMANN app
for iOS and Android turns your smart-
phone or tablet into a practical remote and thus allows a con-
venient and intuitive control of all functions of the musicbook.
A detailed description of the app as well as further
information can be found on our website:
www.lindemann-audio.com
p
