ˇ
soda coolers LINDR
15
CAUTION:
When sanitizing with chemicals
ALWAYS wear rubber gloves.
CAUTION:
After unpacking, place the cooler
in a way so that the heat that is generated
by the cooling unit and it can be sufficiently
ventilated.
CAUTION:
The cooler must be placed indoors
on a dry and horizontal place that is stable.
CAUTION:
There should be no objects
placed on the cooler that would block the air
circulation.
Installation and placing:
Place the cooler on the fixed pad in a horizontal
position and before connecting for the first
time, allow the machine to settle for about
2 hours to acclimatize to the surrounding
conditions. Minimum distance from wall
barriers with ventilation hole must be 20 cm.
CAUTION:
THE CHILLER SHOULD NOT BE PLACED ON ITS SIDE IN ANY
CIRCUMSTANCE, AND NOT EVEN DURING TRANSPORTATION.
Operating conditions:
Our cooling system is designed for flow
chilling of liquids. These devices have all the
relevant features to ensure the health and
safety of users. However, these systems must
not be near any heat sources, or exposed to
direct sunlight. The cooling tank (No. 11)
MUST be filled with clean water without
chemical treatment until the overflow. The
machine achieves optimal performance
when used at ambient temperatures from
6 °C to 28 °C. This machine is intended for use
in normal environment according to ČSN 33
2000-3 and is included in climatic class N.
This Machine MUST NOT BE CLOSE TO HEAT SOURCES, OR
EXPOSED to direct sunlight and rain.
For the proper operation, it is important not to cover
any of the ventilating holes.
Testing:
The product is delivered so that it is ready for
immediate use.
Warranty:
The machine is subject to a general warranty
legal regulations of the Czech Republic,
or by business agreement (*) from the date of
sale. During the warranty period, we will repair
free of charge any defects in the product that
have not been caused by excessive wear,
inappropriate handling, storage or use of the
product contrary to the instructions and its
intended purpose given by the manufacturer.
Materials exchanged during the warranty
are our property. The final decison regarding
the warranty claim always depends on an
authorized service center. (*) The warranty
provided by the seller outside the territory
of the Czech Republic is governed by an
agreement between the seller and the buyer
in their mutual relationship, which is not a
direct relationship with the manufacturer. The
buyer is not entitled to claim the warranty with
the manufacturer. Transport or other costs are
not subject to warranty.
Notice:
The electrical equipment must be revised and
checked in terms of ČSN 33 1600 edition 2
by a knowledgeable and authorized person.
Service-spare parts, required revisions and
inspections are carried out by LINDR.
