First start:
Recommended accessories:
1. Pressure reducer CO2 1-way or 2-way.
2. Water filter (for applications where there is an
unstable water pressure)
3. Water pressure reducer
4. Tubes and fittings
1. Check the connection of water and Co2 (as shown
in picture, page 7).
2. With SODA AS-45, fill the cooling tank with clean
water.
3. Connect the machine to the electrical network.
4.
Turn on the machine:
a) by switch
(SODA ELEGANCE models and SODA AS-45)
b) by thermostat (model SODA PYGMY)
5. Set the thermostat to the required temperature.
1. Take the plastic fitting
and insert the hose into
the body of fitting till it
stops. The tube should be
cut straight to avoid faulty
connection.
How to work with fittings:
2. Hold the gray ring
towards the body of the
fitting and pull the tube
out.
Disassembly of the fittings:
gray ring
JG M1/4 x 9,5mm
the regulator
manometer
Assembly of a water pressure reducer:
1. Regulator MRA 1/4-8m
(SL 2000) is
recommended
for applications with
unstable water pressure.
2. Fitting
JG M 1/4 x 9.5mm
3. Mamometer D 40mm,
0-10 bar. The back one.
WARNING!
Follow the direction of
water supply. (According
to the arrows on the
valve.) Set the pressure to
2 bar. Maximum 3 bar.
MODEL/
TECHNICAL DATA
Power in HP
Output
(lit./hour)
To 0°C/ Tk50°C
The minimum
temperature of
the beverage
number of chilled
beverages
Time required
for cooling
Power
Refrigerant
Weight
Current
Power input
Dimensions
of shell (width)
Dimensions
of shell (height)
Dimensions
of shell (depth)
SODA
PYGMY
180mm
420mm
300mm
230V/
50Hz
2-4 min.
R - 134a
20l/ h.
1/8
4°C
437W
1.90A
20.0 kg
2
SODA
ELEGANCE
215mm
480mm
265mm
230V/
50Hz
2-4 min.
R - 134a
4°C
437W
1.90A
2
20l/ h.
1/8
17.0 kg
SODA
AS-45
440mm
430mm
270mm
R - 134a
2-4 min.
230V/
50Hz
4°C
2
45l/ h.
1/5
25.5kg
1.27A
292W
10.
Summary of Contents for SODA AS - 45
Page 6: ......
