LINDR VK 15, Instruction Manual

4    

1. INTRODUCTION: 

Thank you for purchasing this LINDR product.

2. DEVICE DESCRIPTION

The VK LINDR mini-compressor is primarily de-

signed as an accessory for flow-through cool-

ers and beverage keg pressurisation. 

VK models allow smooth regulation of pres-

sure in 1.0-3.4 bar range (VK LINDR 15) and 1.0-

4.2 bar range (VK LINDR 30). The set pressure is 

displayed in bars on the pressure gauge. The 

compressor can be turned off separately with 

a switch. The air outlet from the compressor 

terminates with a 5/16" (8 mm) speed fitting. 

The air compressor is zero-maintenance, fitted 

with a molecule filter for the drawn-in air.

This manual is designed for the following 

models:

VK LINDR 15/ for dispensing rate:      

40 l/h

VK LINDR 30/ for dispensing rate:  

120 l/h

3. MACHINE PLATE

4. GENERAL INSTRUCTIONS, MEASURES 

AND SAFETY INSTRUCTIONS

Follow basic safety instructions stated by the 

manufacturer when using the device. Any oth-

er use is considered impermissible and there-

fore dangerous. The supplier is not liable for 

damage caused by incorrect use.

DO NOT USE THE DEVICE FOR PURPOSES 

OTHER THAN THOSE STATED BY THE MANU-

FACTURER!

General safety principles. Observe the fol-

lowing safety instructions. 

The supplier is not liable for damage caused 

by activities carried out on this device without 

observing the following instructions!

WARNING:

 Children aged 15 or more and 

persons with reduced physical, sensory or 

mental capabilities or insufficient experience 

and knowledge may only use the device when 

supervised or instructed in safe use of the ap-

pliance and familiarised with potential dan-

gers.

WARNING:

 Children must not be allowed 

to play with the appliance. Store all packaging 

material out of reach of children 

(comes with a 

plastic bag – suffocation hazard)

.

WARNING: 

Cleaning and maintenance of 

the appliance on the part of the user must not 

be done by unsupervised children. 

WARNING:

 Before connecting to main elec-

trical supply, check that the voltage and fre-

quency in the mains corresponds to the data 

stated on the device.

WARNING:

 Always make sure that the sock-

et you intend to plug the device into meets 

the specifications on the machine plate (volt-

age, frequency, input power).

WARNING:

 Never touch electrical compo-

nents with wet or damp hands.

WARNING:

 Always make sure the power 

socket you intend to plug the device into is ac-

cessible, so that the appliance can be immedi-

ately unplugged in case of emergency.

WARNING:

 When unplugging the device 

from the socket, grab the plug and pull it out. 

Do not under any circumstances pull at the ca-

ble; risk of damage.

WARNING

: To turn the device off complete-

ly, unplug the appliance from the power sock-

et.

WARNING:

 In the event the electrical wiring 

of the product becomes damaged, summon a 

trained service technician. Do not under any 

circumstances repair the device yourself.