2-2035 Fisher Dr., Peterborough, ON CANADA K9J 6X6 Ph: (705) 742-1350 or (800) 465-7046 Email: support@lindsaybb.com
11
|
P a g e
LB5155D Series
User Manual
8.0 WEB MANAGEMENT & SERIAL COMMUNICATION
RJ4-5 port & RS-232 both can be used to monitor the LB5155D parameters and adjust output
levels. For serial communication, the computer should be equipped with Window XP to operate
Hyper Terminal. If you are using Windows 7, one could use Putty.
Connect the EDFA with a network cable to the PC RJ45 interface.
Standard RJ45 head as connector pin is defined as follows:
1
:
TX+ 2
:
TX- 3
:
RX+
4
:
No Connect 5
:
No Connect 6
:
RX-
7
:
No Connect 8
:
No Connect
A: green indicator light indicates when the network connection is normal
B: yellow light flashes to indicate the LAN port is sending data
Factory network parameters of the EDFA or they can also be found from the menu functions
from front panel of the EDFA or on the label near the RJ-45 LAN port on the rear panel of EDFA:
IP: 192.168.1.120
Mask: 255.255.255.0
Gateway: 192.168.1.1.
Open a Web Browser. In the address bar enter 192.168.1.120,
Press Enter
, the login screen
will display as shown below. Enter credentials as below:
Username: Admin
Password: 1234