User Manual KVM Terminal LCD
9
LINE WRITE
Test display
SCALE UP
Don't care
FLT
EDGE FLITER
Adjust the image sharpness
MISC FUNC
Adjust the image colour
OSD
OSD ADJUST
Set up OSD position and size
CONTRAST
Sets the contrast of the display
BRIGHTNESS
Sets the brightness of the display
EXIT
EXIT
Exit the menu and save
2-6
Horizontal Position
The item "H-Position" is used to adjust the horizontal image position.
A slider with current value is displayed. The range of the horizontal
position adjustment value is 0 to 250.
H - P O S I T I O N
0
125
250
2-7 Vertical Position
The item "V-Position" is used to adjust the vertical image position.
A slider with current value is displayed. The range of vertical
position adjustment value is 0 to 31.
V - P O S I T I O N
0
125
250
User Manual KVM Terminal LCD
10
2-8
Clock
The item "Clock” is used to adjust the number of clocks (pixels)
per line (sample per line). A slider with current value is displayed.
C L O C K
0
125
250
2-9
Phase
The item "Phase” is used to adjust the ADC sample pixel clock.
A slider with current value is displayed. The range of phase
adjustment value is 0 to 31 for 0 to 360 degrees.
PHASE
0
16
31
2-10 Auto Configuration
The main menu item "Auto config” is used to perform automatic
configuration of the phase, clock, colour, vertical and horizontal
position. Select sub-menu "Auto adjust” to adjust phase, clock,
colour and position. Select "Auto tracking" to adjust phase and
clock. Select "Auto position" to adjust horizontal and vertical
position. Select "Auto gain" to adjust colour.
AUTO CONFIGURATION
AUTO ADJUST
AUTO TRACKING
AUTO POSITION
AUTO GAIN
RETURN
