Lindy 32 277 Installation And Use Manual Download | Manualshive

Page: 10 / 38

background image

Page 8

Installation & Use – English Guide

LINDY ELECTRONICS LTD

2. Installation

2.1 What you will need

•

Cables to connect the LINDY CPU Switch Junior to each of your PC keyboard, video and

mouse ports. Cable specifications are given in appendix B. (You do not need to connect a
mouse cable if you are not using the mouse).

•

A monitor with a standard VGA/SVGA (15 HD pin) connector that will work when connected

directly to each of your PCs. LINDY CPU Switch Junior supports low and high resolution
monitors.

•

A standard AT or PS/2 style keyboard. If you are using an AT keyboard with a 5 pin connector

you may connect this to the LINDY CPU Switch Junior using a standard AT to PS/2 keyboard
adapter.

•

A PS/2 style two or three button Microsoft

®

or Logitech

®

compatible mouse or a Microsoft

®

IntelliMouse compatible mouse. If you wish to use the mouse to switch the LINDY CPU Switch
Junior’s channel then you will need a three button mouse or an IntelliMouse.

(The LINDY CPU Switch Junior supports ‘Internet Mice’ that are compatible with the Microsoft

®

IntelliMouse. These are fitted with a wheel or other scroll control and sometimes have
additional buttons. Examples are: Microsoft

®

IntelliMouse, Logitech

®

Pilot Mouse+, Logitech

®

M, Genius

®

NetMouse and Genius

®

NetMouse Pro).

•

A suitable mouse driver for your PCs. Supported types are:

•

PS/2 or RS232 two button mouse driver (any manufacturer).

•

Microsoft

®

mouse driver (including IntelliMouse).

•

Logitech

®

mouse driver (including two button, three button and wheel mouse).

•

Mouse drivers that use a compatible data format to the Microsoft

®

IntelliMouse. You may

need to try these to assess their compatibility.

•

Use of PS/2 and RS232 style mice with the LINDY CPU Switch Junior - All of the mouse

connections from LINDY CPU Switch Junior to PCs support either a PS/2 or an RS232 mouse.
LINDY CPU Switch Junior automatically converts from the PS/2 mouse commands to RS232
serial mouse commands. Serial mice types are selected by using an adapter as described in
Appendix A. This adapter is the same as is shipped with Microsoft

®

auto-sensing mice. The

LINDY CPU Switch Junior will operate without a mouse connected if you do not wish to use
one.

«
...
8
9
10
11
12
...
»

Summary of Contents for 32 277







































Reviews:

No comments

Related manuals for 32 277

Brand: Cabletron Systems Pages: 88

Brand: E-T-A Pages: 6

Brand: Ubiquiti Pages: 24

Brand: Ubiquiti Pages: 13

Brand: Ubisys Pages: 2

Brand: wavin Pages: 4

Brand: BeeSecure Pages: 35

DXS-3410 Series

Brand: D-Link Pages: 54

ETHERNET Accessories 852 852-0111

Brand: WAGO Pages: 38

Brand: Attwood Pages: 2

Brand: Dahua Pages: 17

Brand: Lantech Pages: 118

Brand: Accton Technology Pages: 10

Brand: Lancom Pages: 23

Brand: Taiden Pages: 21

Universal Videohub 288

Brand: Blackmagicdesign Pages: 107

Brand: Raritan Pages: 4

Brand: BluStream Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands