Page 26
Installation & Use – English Guide
LINDY ELECTRONICS LTD
5.4 Autoscan ‘lock on’ mode and delay time
LINDY CPU Switch Junior OSD can be set to select each channel in turn for a period of time set
by the Autoscan delay time. Autoscan mode is entered by typing the hotkey keys together with
$
.
By default, only those channels which have a powered up computer connected to them will be
scanned. Sometimes it may be desirable to scan all channels, even if the attached computer is
switched off (this will simply show a blank screen when it is selected). All the LINDY CPU Switch
Junior OSD’s ports will be scanned if option
/
is selected. Some applications may also require
the LINDY CPU Switch to power on in autoscan mode. This feature can be selected using the
/
or
/
options.
KEYS
CONFIGURATION DESCRIPTION
/
LINDY CPU Switch locks on to active ports only during autoscanning (default)
/
LINDY CPU Switch locks on to every port during autoscanning
/
LINDY CPU Switch powers on in autoscan mode & locks on to active ports only
/
LINDY CPU Switch powers on in autoscan mode and locks on to all ports
7
2 seconds autoscan delay time before switching to next port (default)
7
5 seconds autoscan delay time before switching to next port
7
7 seconds autoscan delay time before switching to next port
7
10 seconds autoscan delay time before switching to next port
7
15 seconds autoscan delay time before switching to next port
7
20 seconds autoscan delay time before switching to next port
7
30 seconds autoscan delay time before switching to next port
7
60 seconds autoscan delay time before switching to next port
NOTE: Autoscan mode is ended simply by selecting a fixed channel using the on-screen menu,
the keypad, the keyboard hotkeys or the mouse.
Many modern monitors are fitted with automatic power save relays and will switch off after a few
seconds if connected to an inactive PC. If you are using such a monitor you must not use the
/
feature. Constant switching on and off of your monitor's relay will eventually damage your
monitor.