User Manual
English
- 4 -
Troubleshooting
There is no picture on the display.
Check the HDMI Switch Remote and all connected devices are correctly powered up and
switched on.
Make sure all cables and connectors are correctly installed.
If a computer is connected, hit a key or move the mouse to wake it from power saving mode.
The HDMI Switch Remote does not respond to any commands from the remote control.
If present, remove the plastic tab labelled
‘Remove this tab’
that ships with the remote
control.
Make sure you are in line of sight of the HDMI Switch Remote. Make sure that there are no
obstructions which may be blocking the infra-red signal from the remote control.
Try switching channels using the push button to verify correct operation of the switch.
Ensure the battery is correctly installed in the remote control. Try a new battery (Type
CR2025)
