English
Manual
2
Hardware Requirements
Console
A VGA or Multisync monitor of resolution up to 1900x1440
A PS/2 Style Mouse
A PS/2 Style Keyboard
PC
The following equipment must be installed on each PC that is to be connected to the system:
VGA, SVGA or Multisync card.
6-pin mini-DIN (PS/2 style) or DB-9 (standard serial) mouse port.
Either PS/2 Style keyboard port (6-pin mini-DIN, 5V on pin 4, Ground on pin 3) or AT Style
keyboard (5-pin DIN, 5V on pin 5, ground on pin 4).*
* See the note under Cables in the next section.
Cables
Although it is possible to use standard VGA (monitor) and PS/2 (Keyboard and mouse) cables
to connect the PCs to the LINDY CPU Switch LITE OSD-8, for optimum signal integrity and to
simplify the layout, we strongly recommend that you use the following high quality LINDY KVM
cables:
PC to LINDY CPU Switch LITE OSD-8
Length Art.No. Description
1m
33741
Keyboard/Video/Mouse Cable (2x PS/2 + 1x VGA)
2m
33742
Keyboard/Video/Mouse Cable (2x PS/2 + 1x VGA)
3m
33743
Keyboard/Video/Mouse Cable (2x PS/2 + 1x VGA)
5m
33744
Keyboard/Video/Mouse Cable (2x PS/2 + 1x VGA)
10m
33746
Keyboard/Video/Mouse Cable (2x PS/2 + 1x VGA)
Console Extension Cable to LINDY CPU Switch LITE OSD-8
Length Art.No. Description
1m
33721
Keyboard/Video/Mouse Cable (2x PS/2 + 1x VGA)
2m
33722
Keyboard/Video/Mouse Cable (2x PS/2 + 1x VGA)
3m
33723
Keyboard/Video/Mouse Cable (2x PS/2 + 1x VGA)
5m
33724
Keyboard/Video/Mouse Cable (2x PS/2 + 1x VGA)
10m
33726
Keyboard/Video/Mouse Cable (2x PS/2 + 1x VGA)
Note: 1.
If your PC uses a standard AT style keyboard socket you will need to purchase a
PS/2-to-AT keyboard adapter (LINDY Art.No. 70029) or short adaptor cable (LINDY Art.No.
70129) or any standard keyboard adapter, in order to plug the cable into the computer’s
keyboard port.
2.
If your PC uses a standard 9 pin serial port for the mouse, you will need to
purchase a PS/2-to-Serial mouse adapter (LINDY Art.No. 70058) and plug it into the serial port
of the computer.
Do NOT use a serial to PS/2 adaptor at the CPU Swtich !
