Introduction
Thank you for purchasing the LINDY 4 Port HDMI 4K PiP (Picture in Picture) switch with remote control. This high
performance HDMI Switch allows any of the attached four sources to be shown on a UHD display while at the push
of a button you can also view the other channels with Picture in Picture. An Infra-red remote control is supplied to
make switching between sources and displays easier.
Package Contents
4 Port HDMI 4K PiP Switch
5V DC 1A Multi Country PSU
Remote control including battery
This manual
Features
Supports display resolutions up to 4Kx2K@30Hz,1080P@120Hz,and 1080P 3D@60Hz
Supports PiP (Picture in Picture) 1 main picture, 3 sub pictures
3D video support including Frame Packing for all 3D formats up to a 297MHz TMDS clock
Supports up to 48 Bit per pixel colour depths
HDCP 1.4 support (INPUT), HDCP v1.4a protocol compliant (OUTPUT)
Supports the reception of any audio data conforming to the HDMI specification 1.4 such as LPCM at up to
192kHz,compressed audio(IEC 61937),DSD,DST,DTS and HBR
Full colorimetric including sYCC601, Adobe RGB, Adobe YCC601,xvYCC extended gamut colour
Specification
Input Ports: 4 x HDMI Female
Output Ports: 1 x HDMI Female
Power Supply: 5V DC 1A
Dimensions: 117 x 65 x 25mm (WxDxH)
Weight: 120g
Operating Temperature: 0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature: -20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity: 20 ~ 90% RH (Non-condensing)
Power Consumption: 1W Max
Operation
Front Panel
1. POWER LED: The LED will illuminate red when connected to a live power source
2. SWITCH: Press the button to toggle through the inputs
3. IR RECEIVER: Point your remote at this sensor to switch channels
4. OUTPUT LED: The LED will illuminate when a HDMI cable is connected to a display
5. INPUT LED: The LED will illuminate red when the switch has detected a signal and illuminate green when
the input is selected
Summary of Contents for 38151
Page 2: ......