User Manual
English
*
Please see Appendix 1 for the condition for this output resolution.
**
This command only works on custom layout.
Command
Description
Parameter
RIPM
SHOW CURRENT IP MODE
SIPADD N M X Y SET STATIC IP ADDRESS
N=0~255, M=0~255,
X=0~255, Y=0~255
RIPADD
SHOW STATIC CURRENT IP ADDRESS
SMAADD N M X
Y
SET STATIC SUBNET ADDRESS
N=0~255, M=0~255,
X=0~255, Y=0~255
RMAADD
SHOW STATIC CURRENT SUBNET
ADDRESS
SGAADD N M X Y SET STATIC GATEWAY ADDRESS
N=0~255, M=0~255,
X=0~255, Y=0~255
RGAADD
SHOW STATIC CURRENT GATEWAY
ADDRESS
IPCONFIG
SHOW ETHERNET ADDRESS
DEFAULT
RESET THE UNIT TO FACTORY
DEFAULTS
SMUTE 0/1
SET MUTE AUDIO
0=UNMUTE, 1= MUTE
RMUTE
SHOW CURRENT MUTE
SAUDIO N
SET OUTPUT AUDIO TO SPECIFIED
SOURCE
AUDIO SELECT N=0~6,
0 = WINDOW A,
1 = HDMI1,
2 = HDMI2,
3 = HDMI3,
4 = reserved,
5 = DP,
6 = VGA
RAUDIO
SHOW OUTPUT AUDIO SOURCE
SWICORE
**
RESET THE WINDOW A
~ WINDOW D SETTINGS TO FACTORY
DEFAULTS
RFW
SHOW FIRMWARE VERSION
REBOOT
SYSTEM REBOOT
READEDID
READ EDID INFO FROM SINK DEVICE
All manuals and user guides at all-guides.com
all-guides.com
