User Manual
English
Introduction
Thank you for purchasing the 50m HDMI 18G Repeater. This product has been designed to provide trouble
free, reliable operation. It benefits from both a LINDY 2 year warranty and free lifetime technical support.
To ensure correct use, please read this manual carefully and retain it for future reference.
The Lindy 50m HDMI 18G Repeater is an ideal solution for extending high-quality HDMI signals up to
distances of 50m. This active repeater allows the connection of two, long length HDMI cables while
amplifying the source signal to ensure maximum reliability without degradation.
Package Contents
▪
50m HDMI 18G Repeater
▪
USB Type A to Mini-B cable, 0.76m (2.49ft)
▪
Lindy Manual
Features
▪
Extends HDMI Signals up to a maximum of 50m using high quality HDMI cables
▪
Supports resolutions up to 3840x2160@60Hz 4:4:4
▪
High Dynamic Range support for enhanced contrasts and 10 bit colour performance
Specification
▪
HDMI 2.0
▪
HDCP 2.2
▪
Supports CEC & 3D Signals
▪
Maximum bandwidth: 18Gbps
▪
Maximum resolution: 3840x2160@60Hz 4:4:4 8bit
▪
HDR Support: HDR 10
▪
Maximum distance:
▪
3840x2160@60Hz 4:4:4 8bit
– 10m (32.81ft) In / 10m (32.81ft) Out, Total: 20m (65.62ft)
▪
3840x2160@30Hz 4:4:4 8bit
– 20m (65.62ft) In / 20m (65.62ft) Out, Total: 40m (131.23ft)
▪
1920x1080@60Hz 4:4:4 8bit
– 25m (82.02ft) In / 25m (82.02ft) Out, Total: 50m (164.04ft)
▪
Maximum power consumption: 1W
▪
Operating temperature:
0°C - 70°C (32°F - 158°F)
▪
Storage temperature: -10°C - 80°C (14°F - 176°F)
▪
Humidity: 5-90% RH (non-condensing)
▪
Housing material: PVC
Installation
For installation, please follow the steps below.
▪
Connect an HDMI cable from a source device to the “Input” port on the repeater.
▪
Connect an HDMI cable from the “Output” port on the repeater to an HDMI display.
▪
Power on the source and display device.
Installation is now complete.
Troubleshooting
If there is no display on the screen, please check the following:
▪
Ensure all connections between the source, repeater and display are secure. If so, disconnect then
re-connect each connection.
▪
Some HDMI source devices may not provide enough power for the repeater, in these cases, connect
the included USB Type A to Mini-B cable to the repeater and a 5V USB charger.
Summary of Contents for 38211 v2
Page 2: ......
