User Manual
English
Introduction
Thank you for purchasing the 10m USB 3.2 Gen 1 & DP 1.4 Hybrid Cable. This product has been designed
to provide trouble free, reliable operation. It benefits from both a LINDY 2
year warranty and free lifetime
technical support. To ensure correct use, please read this manual carefully and retain it for future
reference.
This fully featured 10m USB 3.2 Gen 1 & DP 1.4 Type C Hybrid Cable allows a USB Type C device or
display to be connected 10m away from the computer, while transferring data with up to 5Gbps, video in
resolutions up to 4K 30Hz and USB Power Delivery for charging.
Package Contents
10m USB 3.2 Gen 1 & DP 1.4 Type C Hybrid Cable
This manual
Features
USB 3.2 / 3.1 Gen 1 specification with data transfer rates up to 5Gbps
Supports DisplayPort Alternate Mode
Supports DP 1.4 (2 lanes)
Supports video resolutions up to 4K 3840x2160 30Hz
Interfaces: USB Type C male to USB Type C male
Supports Power Delivery up to 60W (20V 3A)
Flexible cable (6.5mm diameter) with narrow bend radius for easier installation
Higly resistant to EMI/RFI interference
Compatible with USB Type C equipped computers
Installation
Connect the USB Type C connector marked “Source” to a free USB Type C port on your computer. Your
computer will recognize the new hardware and install any required drivers automatically. Now connect
the other USB Type C plug to your USB device or display.
Please note:
•
USB devices which only support DP signals over 4 lanes might not be compatible.
•
Displays must have set USB settings to USB 3.0 in order to receive video via Type C.
•
Please ensure the connector labelled “Source” is connected to the source device. The cable will
not work correctly in the opposite direction.
