User Manual
English
Now you should see the settings window. Click on Details to find out all of the Thunderbolt software and
controller information. Unfortunately if a Thunderbolt device has not yet been connected to the system,
the information about the NVM firmware may not be available within the utility.
Dual Display Installation
1.
Power on your computer and connect the Thunderbolt Type C connector of the Adapter to a
Thunderbolt 3 equipped port.
2.
Connect a standard HDMI A Male/Male cable (not included) to the HDMI outputs of the Adapter and to
the input ports of your displays. If you are using 4K 60Hz graphics it is recommended to keep the cable
distance to 2m maximum)
3.
Power on the displays and your computer will detect them as two separate displays which can be
configured in Display Settings as usual.
Summary of Contents for 43900
Page 2: ......
