Section 1
Introducing the CAT-32 IP
5
1.6. Optional Cables and Accessories
The remote access KVM over IP module can be installed at any time. To install it into the KVM
Switch CAT-32 ensure all connected computers are switched off or disconnected and the power
supply is unplugged. Open the slot on the back of the KVM Switch and slide the module into the
slot.
KVM over IP module for Stand-alone KVM Switch No. 39631: No. 39636
KVM over IP module for modular KVM Switch No. 39635: No. 39432
The local monitor, mouse and keyboard is connected using their standard cables.
To connect each individual computer to the switch, Cat.5/6 computer modules are required. For
USB or PS/2 computers different modules have to be used as listed below:
For PS/2 computers: Cat.5/6 Computer module PS/2 & VGA, LINDY No. 39633
For USB computers: Cat.5/6 Computer module USB & VGA, LINDY No. 39634
A Cat.5e or 6 UTP cable of appropriate length (max. 100m) is required to connect the KVM
Switch to the computer modules. These cables are available from LINDY in several different
colors and lengths from 0.3m up to 100m. We don’t recommend using shielded FTP/STP
cables. Please find a small overview below:
UTP Cat.5e
0.5m 1m
2m
3m
5m
7.5m 10m 15m 20m 30m
45961 45962 45963 45964 45965 45966 45967 45968 45969 45970
40m 50m 60m 70m 80m 90m 100m
45971 45972 44733 45974 44735 44736 45977
UTP Cat.6
0.5m 1m
2m
3m
5m
7.5m 10m 15m 20m 30m
45771 45772 45773 45774 45775 45776 45777 45778 45779 45780
Daisy Chain Cable
A short Daisy Chain Cable is included to cascade KVM switches with each other. Longer cables
are available from LINDY: No. 39637 (1m) and No.39638 (2m).
To reach even longer distances several 2m cables can be chained together.
