4
CPU IP Access Switch Plus features - front and rear
Considering its capabilities, the CPU IP is supplied within a remarkably compact
casing. Measuring just 198mm x 120mm x 43mm, it occupies just half of a
single (1U) rack space and provides most of its connectors at the rear face. The
smart front face features the IP network port and the operation indicators.
INDOOR USE ONLY
KVM CONSOLE
COMPUTER / KVM SWITCH
5V
COM2
COM1
POWER
CONTROL
MODEM
2A
1
ON
2
Power control port
Optionally use this port
to control one or more
power switches. These
allow the remote user to
take full control of the
host system(s).
KVM console
Connect a keyboard, video
monitor and a mouse to these
three connectors. These allow
you to perform the initial
configuration of the CPU IP.
Additionally, you can use these
to locally control the connected
computer(s).
Computer/KVM Switch
Link these connectors to the
keyboard, video and mouse ports of
the device to be remotely controlled,
either a single computer or a KVM
switch. The USB port on the right
is for future expansion and is not
currently used.
Modem port
Optionally use this port to
attach either a standard
modem or an ISDN adapter.
This feature provides an
alternative, direct-dial, remote
link into the CPU IP.
Power input
Connect
the supplied
power
adapter here.
Configuration
switches
Used for flash
upgrades and
total reset
functions. They
are not required
under normal
circumstances.
LOC REM VNC 100 LNK PWR
IP
Access Switch Plus
IP network port
This intelligent Ethernet
port can automatically
sense whether it is
attached to a 10Mb or
100Mb network.
Indicators
These six indicators clearly show the key aspects of operation:
•
LOC
Keyboard or mouse data is being received from the local console.
•
REM
Keyboard or mouse data is being received from a remote viewer.
•
VNC
Indicates that a remote viewer is connected and active.
•
100
Indicates the Ethernet network speed (10/100Mbs).
•
LNK
Network link and activity indication.
•
PWR
Power indicator.
