1x LM-211IA
2x Fuses
1x Detachable power cord
1x Remote control
1x This user manual
WARNING
Make sure that the device is not plugged into the mains before making any connections. It is also recommended to turn
off or disconnect all other devices associated while making connections to the product.
Keep all packing materials for future use and please fill in the warranty card for registration of warranty.
Please make sure that your local voltage is the same as indicated on the rearpanel. A too low or too high voltage can
cause serious damage to your amplifier. In case you find an improper voltage, please contact our company or your local
dealer.
Product features
- Input stage: 2x 12AX7 et 2x 12AU7
- Power stage: 4x EL34
- Hand-made construction with the finest point-to-point wiring
- Bias control is accessible on top of the amplifier panel with true ampere meter
- Analog Inputs: 4 line inputs
- Load impedance: 4/8Ω
- SoftStart and time-delay circuit. (30 seconds)
- Specially designed EI transformer for power supply
- Two EI output transformers with wide bandwidth are applied
- ALPS volume control and Realcap capacitors are applied
- Metal and removable tube guard cage
- Infrared Remote control
Specifications
Power output:
15W + 15W RMS Triode mode
32W + 32W RMS Ultralinear mode
Working conditions:
Temperature: 0°C to 40°C
Moisture: 20% to 80%
Frequency response (±1,5dB): 10Hz-50KHz
Storage conditions:
Temperature: -20°C to 70°C
Moisture: 20% to 90%
Input sensitivity: 200mV
THD: 1%
S/N ratio: 88dB
Dimensions (W x H x D): 376 x 191,5 x 345 mm
Input impedance: 100kΩ
Output impedance: 4Ω, 8Ω
Tubes: 2x 12AX7, 2x 12AU7, 4x EL34
Net weight: 19,6kg
Power requirements: 230V ±5% (50Hz)
Power consumption: 230W
3
Package content
FRANÇAIS
DEUTSCH
ESP
AÑO
L
IT
ALIANO
ENGLISH