background image

 5

Glossary

This symbol alerts the user to the presence of «dangerous voltage» uninsulated which may pose a risk of 

electric shock to the user.

This symbol alerts the user that the documentation that comes with the device contains important instructions 

for maintenance and proper use of the product.

The  CE  mark  indicates  that  this  product  complies  with  European  directives  called  «low  voltage»  

(2006/95/EC), Electromagnetic Compatibility (2004/108/EC) and apply eco-design requirements for energy 

products (2009/125/EC) when the appliance is installed and used in accordance with the user manual.

For continued compliance only Line Magnetic accessories must be used with this product and servicing must 

be performed by specialized and qualified staff.

The  WEEE  symbol  is  that  of  the  European  Union  regarding  the  recycling  of  electrical  and  electronic 

equipment. It indicates that this product contains electrical and electronic components that can be reused, 

recycled or recovered. Therefore this product should not be disposed of in your regular trash. Thank you to 

return the unit or contact your authorized dealer for more information.

Location and precautions

Avoid placing it in direct sunlight or near a heat source. No source of light shall be placed on the apparatus. Also avoid 

all sources that could cause vibration, dust, cold or moisture. The recommended ambient temperature range is 5-35 °C. 

The device must be installed on a stable, level surface. Do not place the unit on an unstable surface or shelf. The 

unit may fall, causing serious injury to a child or adult as well as serious damage to the product. Do not place other 

equipment on top of the unit.

Due to stray, turntables or CRT TVs magnetic fields should not be located near the unit to avoid possible interference.

Power sources

The unit should be operated only from the type of power source indicated on the label. If you are unsure of the type of 

power available to you, thank you to contact your dealer or the company responsible for the power supply in your area.

Turn off device if you do not intend to use this unit for a long time.

In case of prolonged absence from home, it is recommended to unplug from the electrical outlet.

Make sure each cable is correctly inserted. To prevent hum or background noise, do not mix different other antenna 

cable with the power cord or speaker wires.

FRANÇAIS

DEUTSCH

ESP

AÑO

L

IT

ALIANO

ENGLISH

Warranty

Keep all packing materials for future use and please fill in the warranty card for registration of warranty. 

Your Line Magnetic product is covered by the legal warranty in force in your country. You may also have other rights 

which vary from country to country, state to state.

The guarantee of the product is linked to the exclusive use of tubes supplied by the official distributor and in accordance 

with the assembly technical specifications.

In addition, you benefit from a commercial guarantee offered by BC Diffusion on the products Line Magnetic.

For details on this warranty, please refer to the information available on www.line-magnetic.eu.

Summary of Contents for LM-211iA

















Reviews: