71
DO1052DV
www.domo-elektro.be
SK
· Na dvere si naskrutkujte madlo na otváranie (viď obrázok).
16
· Akonáhle mrazničku usadíte na miesto, nechajte ju ešte 8 hodiny stáť v pokoji než ju zapnete, aby sa
usadilo chladiace médium.
· Po zapnutí bude približne 24 hodín trvať, než sa vnútri mrazničky prechladne požadovaná teplota.
PREHODENIE DVERÍ
Táto chladnička má dvere, ktoré sa dajú prehodiť a otvárať na opačnú stranu. Ak ich chcete prehodiť a
preskrutkovať pánty, zavolajte odborný servis alebo sa aspoň spýtajte skúseného technika.
Pred začiatkom úpravy dverí musí byť chladničky prázdna a vypojení z el. siete.
1.
Vyskrutkujte obe skrutky v zadnej časti krytu mrazničky.
Reverse Door
Tool required:
Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
Ensure the unit is unplugged and empty.
To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
so that it will not slip during the door reversing process.
All parts removed must be saved to do the reinstallation of the door.
Do not lay the unit flat as this may damage the coolant system.
It
'
s
better
that
2
people
handle
the
unit
during
assembly
.
1. Remove two screws at rear side of top cover.
2. Remove top cover and thermostat knob, then place it aside.
3. Unscrew top hinge and then remove door and place it on a soft pad to
avoid scratch.
4. Unscrew bottom hinge. Then remove the adjustable feet from both
side.
7
unscrew
2.
Odstráňte horný kryt mrazničky.
Reverse Door
Tool required:
Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
Ensure the unit is unplugged and empty.
To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
so that it will not slip during the door reversing process.
All parts removed must be saved to do the reinstallation of the door.
Do not lay the unit flat as this may damage the coolant system.
It
'
s
better
that
2
people
handle
the
unit
during
assembly
.
1. Remove two screws at rear side of top cover.
2. Remove top cover and thermostat knob, then place it aside.
3. Unscrew top hinge and then remove door and place it on a soft pad to
avoid scratch.
4. Unscrew bottom hinge. Then remove the adjustable feet from both
side.
7
unscrew
3.
Vyberte skrutky, ktoré držia horný pánt dverí. Dvere nadvihnite a položte ich na mäkký povrch, tak
aby sa nepoškriabali.
Reverse Door
Tool required:
Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
Ensure the unit is unplugged and empty.
To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
so that it will not slip during the door reversing process.
All parts removed must be saved to do the reinstallation of the door.
Do not lay the unit flat as this may damage the coolant system.
It
'
s
better
that
2
people
handle
the
unit
during
assembly
.
1. Remove two screws at rear side of top cover.
2. Remove top cover and thermostat knob, then place it aside.
3. Unscrew top hinge and then remove door and place it on a soft pad to
avoid scratch.
4. Unscrew bottom hinge. Then remove the adjustable feet from both
side.
7
unscrew
Summary of Contents for Domo DO1052DV
Page 77: ...77 DO1052DV www domo elektro be SK ...
Page 78: ...78 DO1052DV ...
