24
DO1069S
EN
3.
When the temperature indicator light goes out again, the selected temperature has been reached.
You can now start ironing.
4.
After ironing, place the iron on the thermal insulation pads. Turn the temperature dial back to “MIN”
to turn off the appliance. The temperature indicator light will now go out. Pull the plug out of the
socket. Allow the appliance to cool down completely.
Caution: Never touch the hot soleplate!
STEAM IRONING
Caution: do not plug in the appliance yet at this point.
1.
Fill the water tank with water. Make sure that you do not exceed the maximum level (1,2 L). Use only
mains water or 50 % mains water and 50 % de-mineralised water if you have hard water.
2.
Replace the water reservoir in the appliance. You will hear a click when the reservoir is correctly
positioned in the appliance. If the reservoir is not correctly positioned in the appliance, it will not
work.
3.
Place the iron on the thermal insulation cushions. Put the plug into the
outlet. Set the temperature dial to the desired temperature, according
to the kind of fabric. The temperature indicator light will light up.
4.
When the temperature indicator light goes out again, the appliance has
reached the correct temperature.
5.
A continuous steam output will be emitted from the bottom.
Please note:
· Do not touch the hot sole of the iron!
· Never aim steam at people!
6.
After ironing, place the iron on the thermal insulation pads. Turn the temperature dial back to “MIN”
to turn off the appliance. The temperature indicator light will now go out.. Pull the plug out of the
socket. Allow the appliance to cool down completely.
IRONING TABLE
Use the dial to select the correct temperature for the correct material.
Symbol
Fabric
Temperature dial
synthetic fabric/silk
70<T<120°C
wool
100<T<160°C
cotton
linnen
140<T<210°C
170<T<225°C MAX
This symbol means that the article can not be ironed!
