28
DO7286S
EN
ACCESSORIES
1. Parquet brush: for parquet floors and other delicate
floors
2. Crevice nozzle: for hard to reach areas like radiators,
crevices, corners, in between pillows,...
The front part of the crevice nozzle can be tilted so
that the brush is visible: for furniture, shelves,...
USE
· Unwind the cord to a substantial length and plug in the vacuum cleaner. The yellow label
on the cord indicates the maximum length of the cord, that should not be exceeded. Make
sure that the red label is not visible during use.
· To turn the vacuum cleaner on and off, press the foot pedal with the symbol.
· When you want to clean hard floors, make sure that the brushes in
the floor nozzle are down. When you want to clean carpet, make sure
that the brushes in the floor nozzle are retracted. The brush can be
adjusted by means of the button on the floor nozzle for retraction or
extension.
· On the handle that is attached to the tubes, there is a small slide
button for extra suction control.
· When you have finished vacuuming, unplug the vacuum cleaner and automatically rewind
the cord by pressing the foot pedal with the symbol. Make sure that the plug does not
whip back and forth while rewinding the cord, by guiding the cord with your hand. This to
prevent possible damage.
CLEANING AND MAINTENANCE
Before cleaning your vacuum cleaner or accessories, always turn off the appliance and remove
the plug from the socket.
DUST CONTAINER
· Hold the handle of the dust container and press the silver button
with the symbol . Carefully pull the dust container up.
· Hold the dust container above the dustbin. Press the button with
the symbol on the back of the dust container, which opens the
bottom and allows the dust to fall out.
· If necessary, wipe the dust container clean with a soft, damp cloth.
· Once the dust is removed, close the bottom until you hear it click.
1
2
