DO908DV/A++
29
www.domo-elektro.be
installing the appliance, this should be done by a qualified
electrician or skilled person.
• Only store edible foods into the freezer.
PARTS
1. Housing
2. Removable wire shelf
3. Thermostat knob (at the back)
4. Adjustable legs
5. Cover for door hinge
6. Door
7. Gasket
8. Temperature sensor
INSTALLATION
Caution:
• Make sure that the appliance does not stand on the electrical cord.
• Parts that become warm should not be exposed. If possible, place the back of
the freezer close to a wall, but do keep the required distance for ventilation, as
indicated with the pin at the back of the appliance.
• After installation, leave the freezer for 12 hours before turning it on. This way the
refrigerant can settle.
This appliance is designed to function in ambient temperatures between 16°C and
32°C. Should the room temperature exceed this reach, the appliance will not function
correctly. The food may spoil.
In order to obtain a correct operation, the appliance should be installed:
• in a dry area
• out of direct sunlight
• away from extreme temperatures (this also means away from a stove or other heat
sources)
• on a strong, stable floor
Ventilation
Above the freezer, there should be a free, empty space of 50 mm.
If it is not possible to keep a free space above the freezer, then keep a free, empty
space of 25 mm at both sides of the freezer.
1
2
3
4
5
6
7
8
