39
DO91123
www.domo-elektro.be
EN
PARTS
1.
Control panel
2.
LED lighting
3.
Shelves
4.
Vegetable container
5.
Levelling feet
6.
Door shelves
INSTALLATION
· Remove the exterior and interior packing, wipe the outside thoroughly with a soft dry cloth and the
inside with a wet, lukewarm cloth. Dry the appliance off well.
· Let air circulate freely around the cabinet.
· Make sure there is sufficient space to open the door.
· This cooling unit is not intended for use as a built-in appliance.
· Select a place with a strong, level floor.
· Avoid direct sunlight and heat. Direct sunlight may affect the acrylic coating. Heat sources nearby will
cause higher electricity consumption.
· Avoid very moist places. Too much moisture in the air will cause frost to form very quickly on the
evaporator, and your refrigerator.
· Before connecting your refrigerator to the power supply, check that the voltage stated on the rating
label of your appliance corresponds to the voltage in your home. A different voltage could damage the
appliance.
· After installation, leave the fridge for 24 hours before turning it on. This way the refrigerant can settle.
· Allow the appliance to run empty for 8 hours so the compartment can cool to the appropriate
temperature.
Summary of Contents for DOMO DO91123
Page 89: ...89 DO91123 www domo elektro be SK...
Page 90: ...90 DO91123...
Page 91: ...91 DO91123 www domo elektro be...
