37
DO91126
www.domo-elektro.be
EN
PARTS
1.
Freezer compartment
2.
Li
temperature control
knob
3.
Shelves
4.
Vegetable container
5.
Levelling feet
6.
Door shelves
INSTALLATION
· Remove the exterior and interior packing, wipe the outside thoroughly with a soft dry cloth and the
inside with a wet, lukewarm cloth. Dry the appliance off well.
· Do not tilt the refrigerator more than 45° when moving it. Do not apply force to any part such as the
door and its handle in order to prevent the refrigerator from deforming, or else its performance will be
influenced.
· Let air circulate freely around the cabinet.
· This cooling unit is not intended for use as a built-in appliance.
· Select a place with a strong, level floor.
· Avoid direct sunlight and heat. Direct sunlight may affect the acrylic coating. Heat sources nearby will
cause higher electricity consumption.
· Avoid very moist places. Too much moisture in the air will cause frost to form very quickly on the
evaporator, and your refrigerator.
· Before connecting your refrigerator to the power supply, check that the voltage stated on the rating
label of your appliance corresponds to the voltage in your home. A different voltage could damage the
appliance.
