39
DO91218F
www.domo-elektro.be
EN
· Before connecting your freezer to the power supply, check that the voltage stated on the rating label
of your appliance corresponds to the voltage in your home. A different voltage could damage the
appliance.
· After installation, leave the freezer for 24 hours before turning it on. This way the refrigerant can
settle.
· Allow the appliance to run empty for 12 hours so the compartment can cool to the appropriate
temperature.
· The freezer makes noise when the compressor pumps the coolant. This is normal.
·
The climate class indicates the minimum and maximum ambient temperature for the proper operation
of an appliance. You can find the climate class on the type plate on the back of the appliance.
· SN: Subnormal: ambient temperature between 10°C and 32°C
· N: Normal: ambient temperature between 16°C and 32°C
· ST: Subtropical: ambient temperature between 16°C and 38°C
· T: Tropical: ambient temperature between 16°C and 43°C
USE
CONTROL PANEL
Display
1.
Temperature of freezer
2.
High temperature alarm
3.
Super-freezing
4.
Degrees Celsius
5.
Degrees Fahrenheit
Touch screen buttons
A. “SUPER” button: Super-freezing/Child safety lock
B. “TEMP” button: Temperature of freezer
When you put the plug in the power socket, the display will be on for 3 seconds. The preset temperature
is -18°C.
The childproof lock switches on automatically if no button is pressed for 30 seconds.
The control panel goes into sleep mode automatically. To unlock the panel, press the “SUPER”
(child
safety) button for 3 seconds.
TEMPERATURE CONTROLS
· The freezer can be set between -30 and +10°C. So you can also use the appliance as a refrigerator.
Summary of Contents for DOMO DO91218F
Page 86: ...86 DO91218F SK...
