33
DO912K
www.domo-elektro.be
EN
· After installation, leave the freezer for 24 hours before turning it on. This way the refrigerant can
settle.
· Allow the appliance to run empty for 8 hours so the compartment can cool to the appropriate
temperature.
· The climate class indicates the minimum and maximum ambient temperature for the proper operation
of an appliance. You can find the climate class on the type plate on the back of the appliance.
· SN: Subnormal: ambient temperature between 10°C and 32°C
· N: Normal: ambient temperature between 16°C and 32°C
· ST: Subtropical: ambient temperature between 16°C and 38°C
· T: Tropical: ambient temperature between 16°C and 43°C
DOOR CONVERSION
If you need to hinge your door on the opposite side it is recommended that you call your local authorised
service agent to make this conversion or ask a technician.
Before you reverse the door, you should ensure the appliance is unplugged and empty. It is recommended
to use a crosshead screwdriver and a spanner (both not supplied).
1.
Remove the 2 screws on the back of the top cover.
.
2.
Lift the top cover away from the fridge.
3.
Remove the three screws and then remove the top hinge that holds the door in place. Lift the door
and place it on a padded surface to prevent it from being scratched.
4.
Remove the bottom screw, hinge bracket and adjustable foot from the bottom of the appliance.
5.
Remove the adjustable foot from another side of the bottom and transfer it to the corresponding
position on the opposite side of the bottom.
Summary of Contents for DOMO DO912K
Page 66: ...66 DO912K...
Page 67: ...67 DO912K www domo elektro be...
