41
DO915TDK
www.domo-elektro.be
EN
PARTS
1. Freezer
2. Thermostat and light
3. Shelves
4. Cover for vegetable container
5. Vegetable container
6. Door shelves
BEFORE THE FIRST USE
· Remove the exterior and interior packing, wipe the outside thoroughly with a soft dry cloth
and the inside with a wet, lukewarm cloth.
· Avoid placing the cabinet in a narrow recess or near any leave source, direct sunlight, or
moisture.
· Let air circulate freely around the cabinet. Keep the rear of the refrigerator 13 cm away
from the wall.
· Select a place with a strong, level floor. One can level the appliance using adjustable legs.
The adjustable legs can be adjusting by screwing them in or out of the appliance.
· Avoid direct sunlight and heat. Direct sunlight may affect the acrylic coating. Heat sources
nearby will cause higher electricity consumption.
· Avoid very moist places. Too much moisture in the air will cause frost to from very quickly
on the evaporator, and your refrigerator.
· Before connecting your refrigerator to the power supply, check that the voltage stated
on the rating label of your appliance corresponds to the voltage in your home. A different
voltage could damage the appliance.
· The appliance must be grounded. The manufacturer is not responsible for damages that
may occur as a result of usage without grounding.
· For uneven surfaces, front feet can be aligned.
· After installation, leave the freezer for 3 hours before turning it on. This way the refrigerant
can settle.
TEMPERATURE CONTROL
· The internal temperature can be controlled by the thermostat, which can be set to 8
different positions. 1 is the warmest setting and 7 is the coldest. To turn off the appliance,
set the temperature control to ‘0’.
· Operating time and temperature are affected by where the freezer is used, the number of
times the door is opened and the temperature of the room it is in.
Summary of Contents for DOMO DO915TDK
Page 10: ...10 DO915TDK NL...
Page 22: ...22 DO915TDK FR...
Page 34: ...34 DO915TDK DE...
