37
DO91774R
www.domo-elektro.be
EN
PARTS
1.
Freezer
2.
Ther LED lighting
3.
Shelves
4.
Vegetable container
5.
Levelling feet
6.
Door shelves
INSTALLATION
· Remove the exterior and interior packing, wipe the outside thoroughly with a soft dry cloth and the
inside with a wet, lukewarm cloth. Dry the appliance off well.
· Let air circulate freely around the cabinet.
· This cooling unit is not intended for use as a built-in appliance.
· Select a place with a strong, level floor.
· Avoid direct sunlight and heat. Direct sunlight may affect the acrylic coating. Heat sources nearby will
cause higher electricity consumption.
· Avoid very moist places. Too much moisture in the air will cause frost to from very quickly on the
evaporator, and your refrigerator.
· Before connecting your refrigerator to the power supply, check that the voltage stated on the rating
label of your appliance corresponds to the voltage in your home. A different voltage could damage the
appliance.
· After installation, leave the fridge-freezer for 24 hours before turning it on. This way the refrigerant
can settle.
1
2
3
4
5
6
