43
DO9248J
www.domo-elektro.be
ES
7
juice,
jam strainer is used for making ketchup only
while frozen dish strainer is used for
making frozen dish. Select the appropriate strainer based on your demand.
3. Assemble the jar lid on the jar correctly. Firstly, put the jar lid downwards and then
make the symbol “ ” on the jar lid align with the symbol “
” on the jar and then rotate
the jar lid clockwise until the symbol “ ” on the jar lid aligns with the symbol “ ”on the
jar (See Fig.4).
After it, press the fastener inwards to lock the jar lid well in position. The
jar lid shall be assembled well in position properly otherwise the appliance will not operate.
Finally, put the food pusher into the jar lid.
Fig.3
Fig.4
6
7
juice,
jam strainer is used for making ketchup only
while frozen dish strainer is used for
making frozen dish. Select the appropriate strainer based on your demand.
3. Assemble the jar lid on the jar correctly. Firstly, put the jar lid downwards and then
make the symbol “ ” on the jar lid align with the symbol “
” on the jar and then rotate
the jar lid clockwise until the symbol “ ” on the jar lid aligns with the symbol “ ”on the
jar (See Fig.4).
After it, press the fastener inwards to lock the jar lid well in position. The
jar lid shall be assembled well in position properly otherwise the appliance will not operate.
Finally, put the food pusher into the jar lid.
Fig.3
Fig.4
7
juice,
jam strainer is used for making ketchup only
while frozen dish strainer is used for
making frozen dish. Select the appropriate strainer based on your demand.
3. Assemble the jar lid on the jar correctly. Firstly, put the jar lid downwards and then
make the symbol “ ” on the jar lid align with the symbol “
” on the jar and then rotate
the jar lid clockwise until the symbol “ ” on the jar lid aligns with the symbol “ ”on the
jar (See Fig.4).
After it, press the fastener inwards to lock the jar lid well in position. The
jar lid shall be assembled well in position properly otherwise the appliance will not operate.
Finally, put the food pusher into the jar lid.
Fig.3
Fig.4
7
7
juice,
jam strainer is used for making ketchup only
while frozen dish strainer is used for
making frozen dish. Select the appropriate strainer based on your demand.
3. Assemble the jar lid on the jar correctly. Firstly, put the jar lid downwards and then
make the symbol “ ” on the jar lid align with the symbol “
” on the jar and then rotate
the jar lid clockwise until the symbol “ ” on the jar lid aligns with the symbol “ ”on the
jar (See Fig.4).
After it, press the fastener inwards to lock the jar lid well in position. The
jar lid shall be assembled well in position properly otherwise the appliance will not operate.
Finally, put the food pusher into the jar lid.
Fig.3
Fig.4
8
8
4. Place your juice container below the juice outlet and residue
container below the residue outlet (see Fig.5). Until now, the
Juicer is ready for operating.
Note:
When need to remove the whole appliance, please grasp
the motor unit instead of the jar lid to remove it to avoid
accident.
USING YOUR JUICER
1. Before attaching the power cord into the outlet, make sure the
power switch is in the “
O
” position, the power switch has three settings: “
I
” indicates
“ON”, press the power switch to “
I
” position to activate the motor and start making juice;
“
O
” indicates “OFF” position, press the power switch to “
O
” position to turn off the
machine; “
R
” means reverse rotation, which is only used when something is stuck and you
need to unclog.
2. Make sure the juice container and the residue container are placed in position.
3. Cut fruits and vegetables into smaller pieces. For example, the carrots shall be cut into
thin slices with size of 15mm×15mm before being put into the machine.
NOTE:
A) Please remove any hard seeds before juicing.
B) It is forbidden to process coconuts, sugarcane or similar hard foodstuffs, since this
may damage the motor.
C
）
）
）
）
It is not recommended to process hard fruit or vegetable rich in fiber and starch.
D) The peel and pits should be removed from oranges, lemons, grapefruits and melons.
4. Drop the prepared fruits or vegetables into the jar lid at an even speed and then let the
Fig.5
9
PREPARACIÓN DE LAS FRUTAS O VERDURAS
· Limpie las frutas y las verduras y córtelas en trocitos. Por ejemplo, corte las zanahorias en rodajas finas
de aproximadamente 15 mm x 15 mm antes de introducirlas en la exprimidora lenta.
· Retire las semillas, pepitas y huesos duros antes de exprimir, de lo contrario se podría dañar el tornillo
de presión. Las frutas con hueso duro deben desosarse. Los huesos de melocotón, ciruela, mango,
albaricoque y el dátil no deben introducirse en la tolva para evitar averías o peligros potenciales.
· Los alimentos con piel gruesa o rígida deben pelarse antes de introducirse en la exprimidora lenta para
procesarlos. Antes de usar se deben retirar tanto la cáscara como las semillas de las naranjas, limones,
toronjas y melones.
· Procesar los cocos con su cáscara y los tallos enteros de la caña de azúcar está prohibido, ni alimentos
similares rígidos, podría dañar el motor.
· Los alimentos con fibras rígidas deben cortarse en trozos de 30-50 mm de longitud y 15-20 mm de
grosor.
· En caso de alimentos con hojas y alimentos con fibras largas y rígidas (como apio, apio de campo, col,
etc.), corte el tallo en rodajas de 30-50mm de longitud y enrolle las hojas.
· Los alimentos congelados pueden usarse tras descongelarlos. No introduzca nunca alimentos
congelados ni hielo en la exprimidora lenta.
· No procese nunca alimentos con elevado contenido de aceite vegetal o animal con esta exprimidora
lenta para evitar que el cabezal de triturado se degrade o dañe.
· No introduzca en la exprimidora lenta nunca caña de azúcar, coco, kudzu, o cereales (como judías,
arroz, etc.) sin empaparlos previamente en agua.
· Nunca ponga demasiados alimentos en el aparato a la vez. Por lo tanto, los alimentos con poca
humedad y las fibras duras se deben cortar en rodajas antes de introducirlos en el embudo.
· No se recomienda procesar frutas o verduras rígidas ricas en fibra ni almidón.
USO
El interruptor de encendido/apagado tiene tres posiciones:
· Encendido: I
· Apagado: O
· Giro en sentido contrario: R
1.
Asegúrese de que la licuadora está apagada (O) e inserte el enchufe en la toma de corriente.
2.
Coloque los dos vasos medidores debajo de los dos pitorros.
