62
DO927BFK
CZ
ČIŠTĚNÍ
Nepoužívejte žádná drsná čistidla, která mohou poškodit povrch přístroje.
1. Vypojte zástrčku z el. sítě.
2. Všechno jídlo z lednice vyjměte a nechte někde v chladu.
3. Pokud je nutné odmrazit ledničku/mrazák, k urychlení tohoto procesu můžete umístit
nádobu s horkou vodou do mrazáku.
4. Zkondenzovanou vodu otírejte hadrem nebo houbou.
5. Lednici vytřete jemným vlhkým hadříkem. Můžete použít i čistící prostředek.
6. Důkladně otřete i těsnění na dveřích. Těsnění potom důkladně vysušte.
7. Po vyčištění lednici opět zapojte do el. sítě a nastavte na požadovanou chladící teplotu.
8. Po chvíli vložte všechno jídlo zpět do lednice.
PŘEHOZENÍ PANTŮ DVEŘÍ
Pokud potřebujete přehodit otevírání dveří na opačnou stranu, musí se přemontovat panty.
Doporučujeme, pozvat si servisního mechanika nebo proškolenou osobu z okolí. Ještě
dříve než začněte panty přemontovávat, lednici vypněte a vše z ní vyndejte pryč. Budete
potřebovat křížový šroubovák a klíč (ani jedno není dodáno v balení).
1. Odejměte krytku šroubů na horní části přístroje. Všechny 3 šroubky vyšroubujte a
odejměte horní pant, který drží dveře. Potom dveře vysaďte a odstavte je stranou na
měkké místo, kde se nepoškrábou.
3. Take off the middle hinge by removing
the screws. Lift the lower door and place
it on a padded surface to prevent it from
scratching.
Remove the screws’ covers and place
them to the opposite side.
Swap the position of the plastic tube and
hole cover on top of the lower door.
Remove the door block, screw and plastic
tube under the lower door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
unscrew
Reversing the Door Swing
Tools required: Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner
1. Take off the hinge cover.
2. Remove the the upper hinge. Lift the
upper door and place it on a padded
surface to prevent it from scratching.
Remove the door block, screw and plastic
tube under the upper door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
• Ensure the unit is unplugged and empty.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
• If you want to have the door swing reversed, we recommend that you contact a
qualified technician. You should only try to reverse the door yourself if you believe
that you are qualified to do so.
8
INSTALLATION
LFC60W16_IB_160201_grace.indd 8
1/2/16 10:43 am
3. Take off the middle hinge by removing
the screws. Lift the lower door and place
it on a padded surface to prevent it from
scratching.
Remove the screws’ covers and place
them to the opposite side.
Swap the position of the plastic tube and
hole cover on top of the lower door.
Remove the door block, screw and plastic
tube under the lower door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
unscrew
Reversing the Door Swing
Tools required: Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner
1. Take off the hinge cover.
2. Remove the the upper hinge. Lift the
upper door and place it on a padded
surface to prevent it from scratching.
Remove the door block, screw and plastic
tube under the upper door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
• Ensure the unit is unplugged and empty.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
• If you want to have the door swing reversed, we recommend that you contact a
qualified technician. You should only try to reverse the door yourself if you believe
that you are qualified to do so.
8
INSTALLATION
LFC60W16_IB_160201_grace.indd 8
1/2/16 10:43 am
2. Na spodní části dveří je zarážka a teflonová krytka. Obě části odmontujte a přesuňte na
druhou stranu.
3. Take off the middle hinge by removing
the screws. Lift the lower door and place
it on a padded surface to prevent it from
scratching.
Remove the screws’ covers and place
them to the opposite side.
Swap the position of the plastic tube and
hole cover on top of the lower door.
Remove the door block, screw and plastic
tube under the lower door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
unscrew
Reversing the Door Swing
Tools required: Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner
1. Take off the hinge cover.
2. Remove the the upper hinge. Lift the
upper door and place it on a padded
surface to prevent it from scratching.
Remove the door block, screw and plastic
tube under the upper door and move
them to the opposite side. You may
need to replace the door block to fit the
opposite side.
• Ensure the unit is unplugged and empty.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
• If you want to have the door swing reversed, we recommend that you contact a
qualified technician. You should only try to reverse the door yourself if you believe
that you are qualified to do so.
8
INSTALLATION
LFC60W16_IB_160201_grace.indd 8
1/2/16 10:43 am
