33
DO980RTKZ
www.domo-elektro.be
EN
PARTS
1. Freezer compartment
2. Temperature control knob
3. Glass shelf
4. Vegetable drawer
5. Levelling feet
6. Door shelves
INSTALLATION
· Remove the exterior and interior packing, wipe the outside thoroughly with a soft dry cloth
and the inside with a wet, lukewarm cloth.
· Select a place with a strong, level floor.
· Allow 10 cm of space between the back of the refrigerator and any adjacent wall.
· Avoid direct sunlight and heat. Direct sunlight may affect the acrylic coating. Heat sources
nearby will cause higher electricity consumption.
· Avoid very moist places. Too much moisture in the air will cause frost to from very quickly
on the evaporator, and your refrigerator.
· Before connecting your refrigerator to the power supply, check that the voltage stated
on the rating label of your appliance corresponds to the voltage in your home. A different
voltage could damage the appliance.
· After installation, leave the freezer for 24 hours before turning it on. This way the
refrigerant can settle.
· Allow the appliance to run empty for 8 hours so the compartment can cool to the
appropriate temperature.
· For uneven surfaces, front feet can be aligned.
· The climate class indicates the minimum and maximum ambient temperature for the
proper operation of an appliance. You can find the climate class on the type plate on the
back of the appliance.
2
1
3
4
5
6
Summary of Contents for DOMO DO980RTKZ
Page 66: ...66 DO980RTKZ...
