AREA 01
SINGLE TRANSMITTER PROGRAMMING
Area 01 is used to enter, suspend, reactivate, delete, and
check the status of single transmitters. A validation group
can be selected for each transmitter when it’s entered into
memory.
Each of the following activities are performed in programming
Area 01. From the main menu, use [
⇑
], [
⇓
] or enter “01” on the
keypad to scroll to “Single Transmitter(s), Enter Program
Area 01” and press [OK]. Press [
*
] when finished to return to
the main menu.
Learning Single Transmitters
➊
Use [
⇑
] or [
⇓
] to scroll to “Learn Single Xmtr(s)” and press [OK].
➋
Use [
⇐
] or [
⇒
] to choose a validation group for the transmitter. Press
[OK] when desired selection is blinking.
➌
Enter the desired transmitter ID# and activate the transmitter.
☞
NOTE: If the transmitter ID # is already in use, an asterisk will show before
the ID #.
For additional transmitters in the same validation group, use [
⇑
] or [
⇓
] to
select the next ID# and repeat Step 3.
For additional transmitters in different validation groups, press [OK] and
repeat Steps 1-3.
Suspending Single Transmitters
➊
Use [
⇑
] or [
⇓
] to scroll to “Enter Single Xmtr Numb”.
➋
Enter the transmitter ID# to suspend and press [OK].
➌
Use [
⇑
] or [
⇓
] to select “Suspend Single Xmtr” and press [OK].
To suspend additional transmitters, repeat Steps 1-3.
Reactivating Single Transmitters
➊
Use [
⇑
] or [
⇓
] to scroll to “Enter Single Xmtr Numb”.
➋
Enter the transmitter ID# to reactivate and press [OK].
➌
Use [
⇑
] or [
⇓
] to select “Reactivate Single Xmtr.” and press [OK].
To reactivate additional transmitters, repeat Steps 1-3.
Status of Single Transmitters
➊
Use [
⇑
] or [
⇓
] to scroll to “Enter Single Xmtr Numb”.
➋
Enter the transmitter ID# for status and press [OK].
➌
Use [
⇑
] or [
⇓
] to select “Status of Single Xmtr.” and press [OK].
To view status of additional transmitters, press [OK] then repeat Steps 1-3.
Deleting One Single Transmitter
➊
Use [
⇑
] or [
⇓
] to scroll to “Enter Single Xmtr Numb”.
➋
Enter the transmitter ID# to delete and press [OK].
➌
Use [
⇑
] or [
⇓
] to select “Delete Single Xmtr.” and press [OK].
To delete additional transmitters, repeat Steps 1-3.
Deleting All Single Transmitters
➊
Use [
⇑
] or [
⇓
] to scroll to “Delete All Single Xmtr.”
➋
Use the [
⇐
] and [
⇒
] keys to select “YES”.
➌
Press [OK] to delete all single transmitter’s from the system.
AREA 01
SINGLE TRANSMITTERS
Learn Single Xmtr(s)
Press OK when Ready
1.1
1.2
1.3
1.4
1.5
1.1B
1.1A
Select Validation Group.
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Learning Transmitters
Transmitter ID: = 0001
Enter Single Xmtr Numb
Enter Xmtr. ID: 000
Suspend Single Xmtr.
Transmitter ID: = [0000]
Reactivate Single Xmtr.
Transmitter ID: = [0000]
Delete One Single Xmtr.
Transmitter ID: = [0000]
Status of Single Xmtr.
Transmitter ID: = [0000]
1.7
1.5A
Item/Code:
Press OK When Ready
1.6
Enter Expiration Date.
Expires On: mm/dd/yyyy
Delete All Single Xmtr.
Are You Sure? Yes No
1.8
41
