AREA 02
BLOCK TRANSMITTERS
Area 02 is used to enter, suspend, reactivate, delete, and
check the status of block coded transmitters. A validation
group can be selected for each transmitter block when it is
entered into memory.
Each of the following activities are performed in programming
Area 02. From the main menu, use [
⇑
], [
⇓
] or enter “02” on the
keypad to scroll to “Block Transmitter(s), Enter Program
Area 02” and press [OK]. Press [
*
] when finished to return to
the main menu.
Entering Block Transmitters
➊
Use [
⇑
] or [
⇓
] to scroll to “Enter Block Xmtr(s)”.
➋
Use [
⇐
] or [
⇒
] to choose a validation group for the transmitter block.
Press [OK] when desired selection is blinking.
➌
Enter the numbers for the start and the end of the transmitter block and
press [OK].
To learn additional block transmitters, repeat Steps 1-3.
Suspending Block Transmitters
➊
Use [
⇑
] or [
⇓
] to scroll to “Enter Transmitter Numb”.
➋
Enter the transmitter ID# to suspend and press [OK].
➌
Use [
⇑
] or [
⇓
] to select “Suspend Block Xmtr” and press [OK].
To suspend any additional transmitters, repeat Steps 1-3.
Reactivating Block Transmitters
➊
Use [
⇑
] or [
⇓
] to scroll to “Enter Transmitter Numb”.
➋
Enter the transmitter ID# to reactivate and press [OK].
➌
Use [
⇑
] or [
⇓
] to select “Reactivate Block Xmtr.” and press [OK].
To reactivate additional transmitters, repeat Steps 1 & 2.
Status of Block Transmitters
➊
Use [
⇑
] or [
⇓
] to scroll to “Enter Transmitter Numb”.
➋
Enter the transmitter ID# for status and press [OK].
➌
Use [
⇑
] or [
⇓
] to select “Status of Block Xmtr.” and press [OK].
To view status of additional transmitters, press [OK] then repeat Steps 1-3.
Deleting All Block Transmitters
➊
Use [
⇑
] or [
⇓
] to scroll to “Delete All Block Xmtrs”
➋
Use the [
⇐
] and [
⇒
] keys to select “YES”.
➌
Press [OK] to delete all block transmitter’s from the system.
AREA 02
BLOCK TRANSMITTERS
2.1
2.2
2.3
2.4
2.1A
2.1B
Enter Block Xmtr(s).
Press OK when Ready
Enter Validation Group.
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Enter Block Range
Start:End 00000:00000
Enter Transmitter Numb
Enter ID Number: 00000
Suspend Block Xmtr.
ID Number : [00000]
Reactivate Block Xmtr.
ID Number : [00000]
2.5
2.6
Status of Block Xmtr.
ID Number : [00000]
Delete All Block Xmtrs.
Are You Sure? Yes No
2.5A
Item/Code:
Press OK When Ready
42
