AERO.100 User Guide
©2016 TLS Corp. ALL RIGHTS RESERVED
Oct 2016
Page 23
of registering is that there are Application Notes, available on the AERO.100 page. These
provide specific configuration details about how to configure AERO.100 for specific needs such
as EAS insertion, local emergency audio insertion, local program insertion and guides to
adjusting loudness control settings, to name a few examples. Software updates and user
manuals can also be found on the product pages.
3.6
3.6
3.6
3.6
Powe
Powe
Powe
Powerrrr
The AERO.100 is equipped with two power supplies (dual redundant internal PSUs). Always
connect BOTH power inlets to clean AC power sources, ideally from separate AC power feeds.
Remember, this is primarily to protect you against unreliable
power sources
and not from
problems with AERO.100’s power supplies. We strongly recommend using an uninterruptible
power supply (UPS) on at least one if not both of the AC power feeds.
Apply AC power to power on the AERO.100; there is no power switch
. The blue light behind
the Linear Acoustic logo illuminates. Startup is complete when the front panel displays the
AERO identification and serial number, the software version and the surrent IP address. This
process may take up to two minutes.
To power off, just remove both AC power cords from the unit.
