AERO.100 User Guide
©2016 TLS Corp. ALL RIGHTS RESERVED
Oct 2016
Page 49
Figure 4-20:
Mute Input 3-6
The GPI command to automate switching between Dolby Digital encoding for 5.1 surround and
2.0 Stereo is shown in Figure 4-21, below.
Figure 4-21
GPI control of channel 3-6 muting
4.12
4.12
4.12
4.12
Dolby Decoding
Dolby Decoding
Dolby Decoding
Dolby Decoding
Dolby E, Dolby Digital and Dolby Digital Plus decoding can be optionally added to each
instance. The configuration options are shown here:
Instance 1 > Input > Dolby Decoder
The AERO will automatically decode a Dolby E, Dolby Digital or Dolby Digital Plus source that is
routed to AERO Input 1/2. If a Dolbyencoded source is not detected the AERO will
automatically look for LPCM audio in the Bypass sources. Bypass Source 1/2 through 7/8 can be
selected.
The user can choose to decode a 7/8 source in the Dolby encoded source or ignore the 7/8 pair.
See Figure 4-22, below.
