AERO.100 User Guide
©2016 TLS Corp. ALL RIGHTS RESERVED
Oct 2016
Page 79
In other applications, like audio for in-house monitoring in control rooms or in-house audio
distribution a downmix can be routed an AES digital audio output. The same downmix output
can be routed simultaneously to an SDI embedded pair and an AES digital audio output.
Example of a configuration for a downmix output
1.
Instance 1 > Output > Output 9/10
2.
Set
Downmix -> 9/10
to On for a full time downmix from the DRC 9/10 output.
3.
There is also a downmix gain control in this menu.
When DRC Local 9/10 output is used for a fulltime downmix the DRC Local processor can still be
used for EAS, local emergency audio, or local program audio replacement of Program 1, OR
Program 2, OR Program 1 AND Program 2.
6.3
6.3
6.3
6.3
Local Audio Insert/Replace
Local Audio Insert/Replace
Local Audio Insert/Replace
Local Audio Insert/Replace
There are several applications for the audio replacement or override of main program audio.
•
Local content may use a different embedded audio pair map than network or syndicated
programming.
•
Network programming does not use upmixing but all local programming is upmixed.
•
Insertion of emergency audio messages or signaling that replaces main audio and/or
SAP audio.
•
Insertion of emergency audio messages or signaling that ducks main and/or SAP audio.
•
Local audio programming that entirely replaces audio programming on the main and/or
SAP program(s).
Local audio configuration:
Instance 1 > Input > Source
and select the audio source for the DRC Local input. The source can
be AES audio or an SDI embedded pair.
Instance 1 > Output > Local > 9/10 Input Mode
. Select Local Mode for 9/10 input mode and all
the Local menu items becomes active.
Configure operation of the local audio override:
