2
LPWWS | Installation Instructions
Choose Placement of Wall Station
The wall station is typically mounted inside the garage
on the wall adjacent to the door into the house. Wall
station can be mounted in any convenient place on a
drywall-covered wall with wood studs and filled with
blown-in or batt insulation.
If possible, avoid affixing the wall station:
• to solid brick or concrete walls
• to metal studs or walls with metal inside
• on top of or near AC electrical lines.
Mount Wall Station
Follow the instructions in the diagram to the right.
Mount Smart Control Wall Station
at least 5 feet above floor level.
Use wood
screws and
drywall
anchors
Route wire through slot
in back of case
Use machine screws when
mounting to a single
gang box
MOUNTING TO WALL
MOUNTING TO GANG BOX
Installing the Wi-Fi Wall Station
Test Wi-Fi Signal Strength
Before you affix the Wi-Fi wall station to the wall, survey
your location to check the Wi-Fi signal. To do this, take your
smart phone or tablet, connect it to your Wi-Fi network and
then place your device on the wall where you want to attach
the wall station.
If you have 2 or 3 bars on your device for the Wi-Fi network,
the signal is strong and you can proceed. If not, use one of
these options to extend your Wi-Fi network’s range.
• Move your Wi-Fi router closer to the garage.
• Purchase a Wi-Fi range extender.
Strong Wi-Fi signal
Smart Control Wall Station will
connect to your Wi-Fi network.
Weak Wi-Fi signal
Smart Control Wall Station may
not connect to your Wi-Fi network.
No Wi-Fi signal
Smart Control Wall Station will
not connect to your Wi-Fi network.
See page 5 to connect the wall station to your mobile device through the Linear Smart Control app.
The Wi-Fi wall station must receive a strong signal from your home’s Wi-Fi router to work.
Summary of Contents for LPWWS
Page 8: ......