background image

4

5

Safety Guide                                          

Please read this safety guide carefully and keep it in a safe place for future 
reference.

Warning:  

This unit must be installed by a competent person in accordance with both 

electrical safety and building regulations, to prevent risk of fire, electrical 

shock or injury.

Read all instructions before using your food waste disposer.

1. 

Do not allow children, the infirm or persons with a mental disability to operate 

2. 

the unit. 

Do not put fingers or hands into a Linear food waste disposer.

3. 

Do not put the following into a disposer: 

4. 

clam or oyster shells

• 

caustic drain cleaners or similar products 

• 

glass, china or plastic 

• 

large whole bones 

• 

metal, such as bottle caps, tin cans, aluminium foil

• 

utensils 

• 

hot grease or other hot liquids 

• 

whole cornhusks

• 

Push the air switch (if fitted) and isolate the unit from the mains power before 

5. 

attempting to clear a jam or remove an object from the disposer.

When attempting to loosen a jam in a waste disposer, use a long wooden 

6. 

object such as a wooden spoon – never use your fingers or metallic objects.

If not using the optional air switch, do not touch the disposer or on/off switch 

7. 

with wet hands to avoid possible electric shock.

When not operating the disposer, leave the stopper in place to reduce the risk 

8. 

of objects falling into the disposer by accident.

Immediately stop the machine if water leakage is detected.   

9. 

LINEAR MANUAL new.indd   5

29/4/10   14:48:32

Summary of Contents for GDBPF-370A3


















Reviews: