-9-
2.4 Set up for the internal RTC (Clock IC)
The lithium secondary battery supplies back up power for the internal RTC (Clock IC). When you use the
analyzer for the first time or when you have not used it for a long time, before using it in logger mode,
connect the analyzer with a PC by USB cable and execute the measurement operation for once in protocol
analyzer mode. When it starts the measurement the time and date in the PC will be set to the RTC in the
analyzer. While this operation (for the minutes) lithium secondary battery will be charged and the RTC
keeps the date and time for about two days in the power-off condition. When the analyzer is powered
for hours, the battery will be fully charged and the date and time in the RTC will be kept for more than 6
months.
■
Uninstall
1. Open “Add/Remove Application” in the “Control Panel.”
(It might be “Add/Remove Programs” for other OS.)
2. Select “LE-LINK27R” and execute “Remove”.
2.3 Installation of the Analysis Software
■
Install
1. Insert the included CD-ROM into the CD-ROM drive of the PC.
Open the folder of “pcsoft” and click on “Setup.exe”.
2. Click “Yes” if the user account dialog box appears.
3. Follow the Install Shield wizard.
4. Read the software license agreement and click “Yes”.
5. Input the serial number of analyzer. (Check the back side of the analyzer)
6. After setup has completed, click “Finish”.
7. Protocol analysis software (LE-LINK27R) is installed.