-22-
Display
Meaning
Time
The time when it received the frame (timestamp)
deltaT
Displays the difference of time stamps compared to the previous time stamp.
(refer to “5.4 Difference of Time Stamp”)
Ch
Displays the channel received. (1: CH1, 2: CH2)
Break
Displays the number of bit for Sync Break width for LIN.
Sync
Displays the Sync Field for LIN
ID
CAN: Displays the received frame ID in HEX.
LIN: Displays the identifier whose parity is removed and the identifier which has
parity in [] in HEX. (e.g. 11110101b => 35 [F5])
Type
Displays the type of received frame.
DATA: Data frame of CAN
REMOTE: Remote frame of CAN
ERROR: Error frame of CAN
FRAME: Frame of LIN
ILLEGAL: Illegal frame of LIN
DL
CAN: Data length code (data byte number) in decimal
LIN: Data length (DLC) in decimal set in the ID setting in configuration (It does not appear
when the frame end of configuration is set to TIME.)
St
If the frame is normal or not
G: Normal frame
B: SynchBreak error of LIN (Dominat is 10 bit)
S: SynchField error of LIN (When it is not 55h)
P: Parity error of LIN
L: Data length error of LIN “When “FRAMEEND” setting is “ID”)
R: There is less than 1byte response data of LIN.
C: Checksum error of LIN or CRC error of CAN
A: ACK error of CAN
E: Error frame of CAN
F: Form error of CAN (When CRC or ACK delimiter is 0.)
D0-D7
Displays the contents of the data field in HEX.
FC
CAN: 2 byte CRC, LIN: Checksum in HEX
I1234
From left to right, digital value of EXIN1, EXIN2, EXIN3, EXIN4 in binary. (0=Low,
1=High)
Measured voltage value of the timing when it received the frame (0: 1.0V or less, 1: 2.3V
or more)
AI1 - AI4
Analog value of EXIN1 - EXIN4 (-15V - +15V)
Voltage value of the timing when it received a frame (unit: V)
TRG
Frame which triggered by trigger function
Quality
*1
Precision of GPS
Invalid : Invalid data received from GPS module
(Displayed content of Latitude, Longitude, Altitude, Geoid is invalid)
GPS : The data received from GPS module is GPS positioning data (valid data).
The number on the right means used satellites (max. 9).
Blank : When it did not receive data from GPS module
(Latitude, Longitude, Altitude, Geoid, UTC also will be blank.)
Latitude
*1
Latitude of GPS (degree, minute, N/S)
Longitude
*1
Longitude of GPS (degree, minute, E/W)
Altitude
*1
Antenna altitude above sea level of GPS (m)
Geoid
*1
Geoid altitude of GPS (m)
UTC
*1
Coordinate Universal Time of GPS (Hour: Minute: Second: Day/ Month/ Year)
Year is displayed in two lower digits.
X
*1
X axis (g) from the acceleration sensor module (±8G)
Y
*1
Y axis (g) from the acceleration sensor module (±8G)
Z
*1
Z axis (g) from the acceleration sensor module (±8G)
*1: Nothing will be displayed in LE-270AR. If selecting OFF for GPS/Acceleration function, nothing will be
displayed in LE-270GR. If selecting ON for GPS/Acceleration function, this item will be displayed, even
though nothing is received from GPS module.