-25-
1). Maximum display voltage
Maximum display voltage can be selected from 1V, 2V, 5V, 10V or 16V.
2). Display/Undisplay the graph of AI1 - 4
The graph of checked AI is displayed.
3). Cursor
The cursor (red dotted line) on a graph can be moved to right and left by the mouse or a Shift + arrow key.
4). The voltage value of the cursor position
The voltage value of the cursor position on the graph (AI1 - 4) would be displayed on the upper right
([Cursor]) of a graph.
5). Display the present voltage value
During Analog mode, the latest value would be displayed on the right ([Now]) of a graph and be updated
every 1 second.
* When displaying the stored data, a scroll bar is appeared and it enables scrolling back to the past data.
4.4 Analog Waveform Display
Display the analog waveform at the specified sampling cycle.
<Analog Waveform Display>
Analog waveform will be displayed only monitoring at Analog mode or displayed data measured by
Analog mode.
* When selecting Analog mode, time stamp resolution can be selected from [Hr:Min:Sec] or [Min:Sec:x1ms].
Refer to “3.2 Configuration of Analysis Software ■ Analyzer Settings”
■ Analog mode setting
Select “ANALOG” (Analog mode) at Function, then select sampling cycle (min.1ms, max.10min).
4)
5)
3)
2)
1)