15
OFF THE CPS with this grid.
1) Press continuously ON / OFF for longer than a second to switch off the 'inverter operating.
2) At this point, the display shows the level of battery charge, also once the 'Inverter turns off the machine returns to standby
mode.
3) After switching off the 'INVERTER to completely turn off the machine, remove the main power supply. The machine
performs a self-diagnosis and after a few seconds the display and the machine completely shuts down.
OFF without main electric power supplied (in battery mode).
1) Press and hold ON / OFF for longer than a second to turn the CPS.
Caution is advised to switch off all loads connected to the CPS before turning it off both in battery mode in which
electric network mode present.
METHOD 'FAULT
In case of errors the red FAULT LED flashes and indicates the presence of errors.
11
Inv. Soft start fail
Software Inverter Fault
12
Inv. Volt High
High Voltage Inverter
13
Inv. Low Volt
low-voltage inverter
27
Battery Too High
High battery voltage
28
Battery Too Low
Low battery voltage
41
over Temperature
overheating
43
Overload Fault
input voltage Overload
44
Fan Fail Fault
Cooling fan fault
45
Charger Fail Fault
fault Charger
WARNING AND ERROR CODES